Showing posts with label RGPV M.TECH 1ST SEM SYLLABUS. Show all posts
Showing posts with label RGPV M.TECH 1ST SEM SYLLABUS. Show all posts

Monday, 1 August 2011

DIGITAL COMMUNICATION 1ST SEM

META TAGS:- DOWNLOAD RGPV M.TECH 1ST SEM DIGITAL COMMUNICATION SYLLABUS I RGTU DIGITAL COMMUNICATION M.TECH 1ST SEM SYLLABUS I RGTU M.TECH ADVANCED MATHEMATICS SYLLABUS I RGTU M.TECH 1ST SEM MICRO-CONTROLLER SYSTEM DESIGN SYLLABUS I RGTU M.TECH 1ST SEM DSP APPLICATION SYLLABUS I RGTU M.TECH 1ST SEM VLSI DESIGN SYLLABUS I RGTU M.TECH 1ST SEM DATA COMMUNICATION AND COMPUTER NETWORK SYLLABUS I RGPV M.TECH 1ST SEM DIGITAL COMMUNICATION SYLLABUS I RGPV M.TECH DIGITAL COMMUNICATION 1ST SEM SYLLABUS I DOWNLOAD RGTU M.TECH 1ST SEM DIGITAL COMMUNICATION SYLLABUS
Rajiv Gandhi Proudhyogiki Vishwavidyalaya, Bhopa
Master of Engineering ( M.E.)
DIGITAL COMMUNICATION 1ST SEM SYLLABUS


Monday, 11 July 2011

POWER ELECTRONICS APPLICATIONS IN POWER SYSTEM (MEPS-104)SYLLABUS

TAGS:-RGPV M.TECH 1ST SEM SYLLABUS I RGPV M.TECH 1ST SEM POWER SYSTEM SYLLABUS I RGPV M.TECH 1ST SEM POWER ELECTRONICS APPLICATIONS IN POWER SYSTEM SYLLABUS I RGPV M.TECH 1ST SEM MEPS-104 SYLLABUS I M.TECH MEPS-104 SYLLABUS
 POWER ELECTRONICS APPLICATIONS IN POWER SYSTEM (MEPS-104)SYLLABUS
UNIT I
Power System components:models formation of bus admittance matrix,algorithm for formation of bus impedance matrix. Reactive power capability of an alternator,transmission line model & loadability, Reactive power transmission & associated difficulties,Regulated shunt compensation,Models of OLTC & Phase shifting transformer, load flow study.
UNIT II 
Sensitivity analysis:Generation shift distribution factors,line outage distribution factors, Compensated shift factors.Power systems security levels,contingency selection & evaluation, security constrained economic dispatch.Pre-contingency corrective rescheduling.
UNIT-III 
Voltage stability:Proximity indicators e.g. slope of PV curve,Minimum Eigen value of reduced load flow Jacobian participation factors based on modal analysis and application.
UNIT-IV 
Flexible ac transmission system:reactive power control,brief description and definition of FACT’s controllers, shunt compensators, configuration and operating characteristics of TCR, FC-TCR, TSC, Comparisons of SVCs.
UNIT-V 
Thy thyristor controlled series capacitor (TCSC):Advantages of the TCSC,Basic principle and different mode of operation, analysis variable reactance model and transient stability model of TCSC.
REFERENCE BOOKS:
  • Modern power system analysis D.P. Kothari, I.J. Nagrath, TMH, 2003
  • Power generation operation and control, A.J. Wood, B.F Woolenberg, John W
  • Understanding facts: Concepts and technologies of flexible AC transmission system IEEE Press, 2001 N.G. Hingorani, L. Gyugyi
  • Power system stability and control IEEE press P. Kundur, 1994
  • Thyristor Based FACTS controllers for electrical Transmission systems- R.M. Mathur, R.K. Verma, Wieldy inter science, 2002

Sunday, 10 July 2011

M.TECH POWER SYSTEM 1ST SEM SYLLABUS I RGPV M.TECH POWER SYSTEM 1ST SEM SYLLABUS I RGPV M.TECH POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH POWER SYSTEM 1ST SEM SYLLABUS I DOWNLOAD RGPV POWER SYSTEM M.TECH SYLLABUS I M.E. RGTU POWER SYSTEM SYLLABUS I M.E.1ST SEM POWER SYSTEM SYLLABUS IN PDF I RGTU POWER SYSTEM 1ST SEM M.TECH SYLLABUS I RGTU M.TECH 1ST SEM POWER SYSTEM SYLLABUS I RGTU M.TECH POWER SYSTEM REVISED SYLLABUS I RGTU M.TECH POWER SYSTEM SYLLABUS I RTU POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.E POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH ALL SEM SYLLABUS I M.TECH POWER SYSTEM ALL SEM SYLLABUS I POWER SYSTEM 1ST SEM RGTU SYLLABUS I RGTU POWER SYSTEM 1ST SEM ALL SYLLABUS I RGTU M.TECH POWER SYSTEM ALL SYLLABUS I RGTU M.Y=TECH POER SYSTEM ALL SEM SYLLABUS I

META TAGS:-RGPV M.TECH SYLLABUS I RGPV M.TECH 1T SEM SYLLABUS I RGPV M.E. 1ST SEM POWER SYSTEM SYLLABUS I M.TECH 1ST SEM POWER SYSTEM SYLLABUS I RGPV M.TECH POWER SYSTEM 1ST SEM SYLLABUS  I DOWNLOAD RGPV M.TECH POWER SYSTEM SYLLABUS I RGPV M.TECH POWER SYSTEM 1ST SEM SYLLABUS I RGPV M.TECH POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH POWER SYSTEM 1ST SEM SYLLABUS I DOWNLOAD RGPV POWER SYSTEM M.TECH SYLLABUS I M.E. RGTU POWER SYSTEM SYLLABUS I M.E.1ST SEM POWER SYSTEM SYLLABUS IN PDF I RGTU POWER SYSTEM 1ST SEM M.TECH SYLLABUS I RGTU M.TECH 1ST SEM POWER SYSTEM SYLLABUS I RGTU M.TECH POWER SYSTEM REVISED SYLLABUS I RGTU M.TECH POWER SYSTEM SYLLABUS I RTU POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.E POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH ALL SEM SYLLABUS I M.TECH POWER SYSTEM ALL SEM SYLLABUS
R.G.PV. BHOPAL
M.E. / M.TECH POWER SYSTEM 1ST SEM SYLLABUS
    META TAGS:-RGTU M.E. POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH 1ST SEM SYLLABUS FOR POWER SYSTEM I RGTU M.E. POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.TECH 1ST SEM POWER SYSTEM COMPLETE SYLLABUS I RGTU M.TECH 1ST SEM POWER SYSTEM REVISED SYLLABUS I DOWNLOAD RGTU POWER SYSTEM 1ST SEM SYLLABUS I RGTU M.E. 1ST SEM POWER SYSTEM NEW SYLLABUS I POWER SYSTEM 1ST SEM RGTU SYLLABUS I RGTU POWER SYSTEM 1ST SEM ALL SYLLABUS I RGTU M.TECH POWER SYSTEM ALL SYLLABUS I RGTU M.Y=TECH POER SYSTEM ALL SEM SYLLABUS I

    Thursday, 26 May 2011

    RGPV ME/ M.TECH DIGITAL COMM. ADVANCED MATHEMATICS (MEVD-101)

    Rajiv Gandhi Proudhyogiki Vishwavidyalaya, Bhopal
    Master of Engineering ( M.E.)
    1st Sem Digital Communication Syllabus
    RGPV ME/ M.TECH DIGITAL COMM. ADVANCED MATHEMATICS (MEVD-101) 
    UNIT I 
    Solution of Partial Differential Equation (PDE):by separation of variable method,numerical solution of PDE (Laplace,Poisson’s, Parabola) using finite difference methods,Elementary properties of FT, DFT, WFT, Wavelet transform, Haar transform.
     
    UNIT II
    Probability:compound probability and discrete random variable.Binomial, Normal,Poisson’s distribution. Sampling distribution,elementary concept of estimation and theory of hypothesis, recurred relations.

     
    UNIT III
    Stochastic process:Markov process transition probability transition probability matrix, just and higher order Markov process, Markov chain. Queuing system, transient and steady state,traffic intensity,distribution queuing system,concepts of queuing models (M/M/1:Infinity/ Infinity/ FC FS), (M/M/1: N/ Infinity/ FC FS), (M/M/S: Infinity/ Infinity/ FC FS)

     
    UNIT IV
    Operations of fuzzy sets:fuzzy arithmetic & relations,fuzzy relation equations,fuzzy logics. MATLAB introduction, programming in MATLAB scripts, functions and their application.

     
    UNIT V
    Introduction and definition of reliability:derivation of reliability functions, Failure rate,Hazard rate, mean time t future & their relations, concepts of fault tolerant analysis, Elementary idea about decision theory and goal programming.

     
    REFERENCE BOOKS: 

    • Higher Engineering Mathematics by B.V. Ramana, Tata Mc Hill.
    • Advance Engineering Mathematics by Ervin Kreszig, Wiley Easten Edd.
    • Applied Numerical Methods with MATLAB by Steven C chapra, Tata Mc Graw Hill.
    • Introductory Methods of Numerical Analysis by S.S. Shastry,
    • Introduction of Numerical Analysis by Forberg
    • Numerical Solution of Differential Equation by M. K. Jain
    • Numerical Mathematical Analysis By James B. Scarborogh
    • Fourier Transforms by J. N. Sheddon
    • Fuzzy Logic in Engineering by T. J. Ross
    • Fuzzy Sets Theory & its Applications by H. J. Zimmersoms
    META TAGS:- RGPV M.TECH 1ST SEM DIGITAL COMMUNICATION SYLLABUS I RGTU M.TECH DIGITAL COMMUNICATION 1ST SEM SYLLABUS I RGPV M.TECH 1ST SEM ADVANCED MATHEMATICS SYLLABUS I RGPV M.TECH 1ST SEM DIGITAL COMMUNICATION ADVANCED MATHEMATICS SYLLABUS I RGPV M.TECH SYLLABUS I RGTU M.TECH 1ST SEM DIGITAL COMMUNICATION I RGTU M.TECH 1ST SEM ADVANCED MATHEMATICS PAPERSI RGTU DIGITAL COMMUNICATION M.TECH 1ST SEM ADVANCED MATHEMATICS SYLLABUS I RGPV M.TECH 1ST SEM ADVANCED MATHEMATICS SYLLABUS

    DIGITAL COMMUNICATION 1ST SEM SYLLABUS

    TAGS:-:ME 1st sem digital communication syllabus,rgpv m.tech digital comm syllabus,m.tech digital communication 1st sem syllabus,rgpv m.tech 1st sem syllabus,rgtu m.tech syllabus,digital communication syllabus,m.tech digital communication syllabus,rgtu 1st sem syllabus
      Rajiv Gandhi Proudhyogiki Vishwavidyalaya, Bhopal
    Digital Communication Syllabus
    RGPV ME/ M.TECH DIGITAL COMM. ADVANCED MATHEMATICS (MEVD-101) 
    UNIT I
    Solution of Partial Differential Equation (PDE) by separation of variable method,numerical solution of PDE (Laplace, Poisson’s, Parabola) using finite difference methods,Elementary properties of FT, DFT, WFT, Wavelet transform, Haar transform.


    UNIT II
    Probability, compound probability and discrete random variable.Binomial, Normal,Poisson’s distribution.Sampling distribution,elementary concept of estimation and theory of hypothesis,recurred relations.Continue>>>>>

    RGPV ME/ M.TECH DIGITAL COMM. MICRO CONTROLLER SYSTEM DESIGN (MEDC-102) 
    Unit I
    Review of 8-Bit and 16-bit microprocessor, support chips and interfacing techniques, single chip micro-computers, architecture, program and data memory, ports, input Output interfacing and programming,


    Unit II
    Single chip micro controllers-INTEL 8051/ 8751,MOTOROLA 68HC0/68HC11 architecture, instruction set and programming, Memory mapping, addressing modes,Registers,expanded modes.Interrupt handling timing and serial I / O. Continue>>>>

    RGPV ME/ M.TECH DIGITAL COMM. DSP APPLICATION (MEDC-103) 
    Unit I
    Review of Discrete time signals:
    sequences, representation. Discrete time systems: linear, time in variant, LTI systems, properties, and constant coefficients difference equations. Frequency Domain representation of discrete time signals and systems

    Unit II
    Review of Z Transform – Properties, ROC, Stability, Causality, Criterion. Inverse Z Transform, Recursive and Non Recursive systems, Continue>>>>>


    RGPV ME/ M.TECH DIGITAL COMM. VLSI DESIGN (MEDC-104) 
    Unit I
    Introduction:Basic concept of integrated circuits and manufacturing,Design fundamental for digital CMOS circuits, Design Abstraction and circuit Validation.

    Unit II
    CMOS circuit and Logic Design: CMOS Logic gate design, Basic Physical design, CMOS Logic structure, I /O Structure, Continue>>>>

    RGPV ME/ M.TECH DIGITAL COMM. DATA COMMUNICATION AND COMPUTER NETWORK (MEDC-105) 
    Unit 1
    Review of synchronous and asynchronous transmission
    : circuit switching, message switching,packet switching and their comparison, various detector techniques, parity check, vertical and longitudinal redundancy check and CRC code and their error detecting capabilities. RS-232 C and X.21 standards, modern operation, null model.

    Unit II
    Data link control: point-to-point and multi-point links, flow control, sliding window protocol, various ARQ technique for eroor control and their comparison and performance analysis,HDLC as a bit oriented link control protocol.Continue>>>>

    DOWNLOAD RGPV ME/M.TECH DIGITAL COMMUNICATION 1ST SEM SYLLABUS PDF

    Friday, 29 April 2011

    RGPV M.TECH FORCED COMMUTATION CIRCUITS (MEPE-104) SYLLABUS

    tags:-rgpv m.tech 1st sem power electronics system,rgtu m.tech 1st sem power system syllabus,rgpv forced commutation circuits syllabus,rgpv power electronics 1st sem syllabus for forced commutation circuit syllabus,rgtu syllabus

    RGPV M.TECH FORCED COMMUTATION CIRCUITS (MEPE-104) SYLLABUS

    PAPER CODE-MEPE-101     MAX. MARKS -100     MIN MARKS-40    DURATION-3Hrs
    UNIT – I
    Inverter principles, Commutation techniques. Different types of single phase and three phase inverters, voltage control techniques.

    UNIT-II
    Current sourced and voltage sourced inverters, Waveform synthesis, voltage Frequency and phase sequence control, voltage and current relations, Harmonics study.

    UNIT-III
    Principles and classification of chopper circuits, analysis of practical choppers for single two and four quadrant operation, Device selection, Control circuits, Switch mode power supplies, Square wave switching, Resonant mode operation of power supplies, Ferroresonant, Linears and the switchers.

    UNIT-IV
    Induction heating, induction welding and Melting. Application to Dielectric heating. Medium frequency supplies for induction heating, high frequency sources for fluorescent lamps. R.F. generators, Laser power supply.

    UNIT-V

    Power supplies for SRM drive, power supplies for AC and DC drives, Device ratigs, Device Data sheets. Safe operating areas. Control circuits.

    Reference Books:
    1. Power Electronics                                          M.H. Rashid
    2. Power Electronics                                          Ned Mohan
    3. Power Electronics                                          P.C. Sen
    4. Hand book of Power Electronics                  M.H. Rashid
    5. Power Electronics                                          M.D. Singh

    Thursday, 28 April 2011

    RGPV M.TECH POWER ELECTRONICS DEVICES & PHASE CONTROLLED SIRCUITS SYLLABUS (MEPE-102)

    tags:-rgpv power electronics devices and phase controlled circuit syllabus,rgpv m.tech power electronics devices syllabus,rgpv m.tech power electronics 1st sem syllabus,rgpv m.tech 1st sem syllabus,rgtu m.tech 1st sem syllabus

    RGPV M.TECH POWER ELECTRONICS DEVICES & PHASE CONTROLLED SIRCUITS SYLLABUS (MEPE-102) 
    PAPER CODE-MEPE-102     MAX. MARKS -100     MIN MARKS-40    DURATION-3Hrs

    UNIT- I
    Review of power switching devices i.e. Thyristor, MOSFET, GTO, IGBT, BJT,MCTS. Trigger techniques optical isolator, protection circuit, isolation transformer  Natural and forced commutation of SCR.

    UNIT - II
    Phase controlled rectifier configuration. Control of output voltage by sequence and sector control. Reduction on harmonics using multiple pulse control, design of rectifier circuit. Comparative aspects of design using convertor transformer forced sell turn off devices. Design of Chopper circuit, reduction of harmonic circuit, multiphase choppers. Analysis of rectifier and chopper circuit.

    UNIT – III
    Single phase and three phase controllers. Triggering techniques. Concept of dual
    converters. Circulating and non circulating current. Mode of operation.
    Regenerative braking

    UNIT – IV
    Concepts of three phase to single phase and three phase to three phase cycloconverter. Symmetrical and asymmetrical control. Harmonic analysis of output voltage.

    UNIT – V

    Line commutated inverters, Margin angle, HVDC, Converter reactions on load side and source side.

    Reference  Books:-
    1. Power Electronics                M.H. Rashid
    2. Power Electronics                Ned Mohan
    3. Power Electronics                P.C. Sen
    4. Hand book of Power  ElectronicsM.H. Rashid
    5. Power Electronics               M.D. Singh

    Tuesday, 12 April 2011

    RGPV ME/ M.TECH DIGITAL COMMUNICATION SYLLABUS

    TAGS:-:ME 1st sem digital communication syllabus,rgpv m.tech digital comm syllabus,m.tech digital communication 1st sem syllabus,rgpv m.tech 1st sem syllabus,rgtu m.tech syllabus,digital communication syllabus,m.tech digital communication syllabus,rgtu 1st sem syllabus

    RGPV ME/ M.TECH DIGITAL COMM. ADVANCED MATHEMATICS (MEVD-101) 

    RGPV ME/ M.TECH DIGITAL COMM. MICRO CONTROLLER SYSTEM DESIGN (MEDC-102) 

    RGPV ME/ M.TECH DIGITAL COMM. DSP APPLICATION (MEDC-103) 

    RGPV ME/ M.TECH DIGITAL COMM. VLSI DESIGN (MEDC-104) 

    RGPV ME/ M.TECH DIGITAL COMM. DATA COMMUNICATION AND COMPUTER NETWORK (MEDC-105) 


    RGPV ME/ M.TECH DIGITAL COMM. LAB-I(102,103) (MEDC-106) 

    RGPV ME/ M.TECH DIGITAL COMM. LAB-II (104,105) (MEDC-107)

    Thursday, 19 August 2010

    CMOS VLSI DESIGN SYLLABUS

    TAGS:- RGTU M TECH SYLLABUS, RGPV CMOS VLSI SYLLABUS, M TECH VLSI DESIGN SYLLABUS,RGPV  M.TECH 1ST SEM SYLLABUS, RGPV M.TECH 1ST SEM VLSI DESIGN SYLLABUS, CMOS VLSI DESIGN M.TECH SYLLABUS, RGPV ECE M TECH SYLLABUS, DOWNLOAD M.TECH 1ST SEM SYLLABUS  I RGPV M.TECH CMOS VLSI DESIGN SYLLABUS I RGTU CMOS VLSI DESIGN M.TECH SYLLABUS I RGTU M.TECH CMOS DESIGN SYLLABUS I RGPV CMOS DESIGN SYLLABUS
    Rajiv Gandhi Technological University, Bhopal (MP)
    M.E./ M.Tech. Embeded System and VLSI Design SVITS(INDR)

    CMOS VLSI DESIGN SYLLABUS
    UNIT-I
    VLSI design methodologies:VLSI Design flow, Design Hierarchy, Regularity, Modularity and Locality,VLSI design styles,Design quality,Packaging technology.MOS device design equations , Second order effects, the complementary CMOS Inverter DC characteristics.

    UNI-II
    Circuit Characterization and Performance Estimation:Parasitic effect in Integrated Circuits ,Resistance estimation,capacitance estimation,Inductance.Switching characteristics,CMOS - Gate transistor sizing,Power dissipation,CMOS Logic Structures,Clocking Strategies.
     
    UNITIII
    CMOS Process Enhancement & Layout Considerations:Interconnect,circuit elements, Stick diagram, Layout design rules, Latchup, latchup triggering, latchup prevention, Technology related CAD issues.
     
    UNIT IV
    Subsystem Design: Structured design of combinational logic-parity generator,Multiplexer, code converters.Clocked sequential circuits-two phase clocking,charge storage,dynamic register element,dynamic shift register. Subsystem design process,Design of ALU subsystem, Adders, Multipliers.Commonly used storage/ memory elements.
     
    UNIT V
    Field Programmable Devices:Definitions of Relevant Terminology,Evolution of Programmable Logic Devices,User-Programmable Switch Technologies,Computer Aided Design (CAD) Flow for FPDs,Programmable Logic,Programmable Logic Structures,Programmable Interconnect, Reprogrammable Gate Array, Commercially Available SPLDs,CPLDs and FPGAs,Gate Array Design,Sea-of-Gates.
     
    TEXT / REFERENCE BOOKS:
    • D.A. Pucknell, K. Eshraghian, Basic VLSI Design, PHI, 3rd Ed.
    • John P. Uyemura, Introduction to VLSI Circuits and Systems, John Wiley & Sons.
    • Niel H.E. Weste, K. Eshraghian,, Principles of CMOS VLSI Design, Person, 2nd Ed.
    • Mead and L. Conway, Introduction to VLSI Systems, Addison-Wesley.
    • A. Mukherjee, Introduction to nMOS and CMOS VLSI systems design, Prentice Hall.